Articles
What is PWM

What is PWM?

Pulse Width Modulation (PWM) is the most effective means to achieve constant voltage battery charging by switching the solar system controller’s power devices. When in PWM regulation, the current from the solar array
tapers according to the battery’s condition and recharging needs.
 
Why is there so much excitement about PWM?
 
Charging a battery with a solar system is a unique and difficult challenge. In the “old days,” simple on-off regulators were used to limit battery outgassing when a solar panel produced excess energy. However, as solar systems matured it became clear how much these simple devices interfered with the charging process. The history for on-off regulators has been early battery failures, increasing load disconnects, and growing user dissatisfaction. PWM has recently surfaced as the first significant advance in solar battery charging.
PWM solar chargers use technology similar to other modern high quality battery chargers. When a battery voltage reaches the regulation setpoint, the PWM algorithm slowly reduces the charging current to avoid heating and gassing of the battery, yet the charging continues to return the maximum amount of energy to the battery
in the shortest time. The result is a higher charging efficiency, rapid recharging, and a healthy battery at full capacity.
In addition, this new method of solar battery charging promises some very interesting and unique benefits from the PWM pulsing. These include:
1. Ability to recover lost battery capacity and desulfate a battery.
2. Dramatically increase the charge acceptance of the battery.
3. Maintain high average battery capacities (90% to 95%) compared to on-off regulated state-of charge levels that are typically 55% to 60%.
4. Equalize drifting battery cells.
5. Reduce battery heating and gassing.
6. Automatically adjust for battery aging.
7. Self-regulate for voltage drops and temperature effects in solar systems.
These benefits are discussed in more detail in the following addendum.
 
How does this technology help me?
 
The benefits noted above are technology driven. The more important question is how the PWM technology benefits the solar system user. Jumping from a 1970’s technology into the new millennium offers:
• Longer battery life:
– reducing the costs of the solar system
– reducing battery disposal problems
• More battery reserve capacity:
– increasing the reliability of the solar system
– reducing load disconnects
– opportunity to reduce battery size to lower the system cost
• Greater use of the solar array energy:
– get 20% to 30% more energy from your solar panels for charging
– stop wasting the solar energy when the battery is only 50% charged
– opportunity to reduce the size of the solar array to save costs
• Greater user satisfaction:
– get more power when you need it for less money!!
Are all of these benefits
tested and proven?
A great deal of testing and data supports the benefits of PWM. More information is attached that describes the technology and various studies.

 Energieliga.deEnergyleague.com

DEPAR SOLAR GROUP
Address: Anadolu Blv.145.sk. Macunkoy 06370 Ankara Turkey
+90.312.3977236 E-Mail: info@deparsolar.com
Visitors - Today: 87 Total: 1787113
© 2015 DEPAR SOLAR GROUP - All Rights Reserved. | AKSETWEB